AlbaCombi Engine Monitoring 15 PGN- Analog to NMEA 2000 Signal Converter

Description

Alba-Combi Engine Monitoring 15 PGN - Analog to NMEA 2000 Signal Converter
Translate analogue signals from all over the boat to an NMEA2000 ®
Specifications:
- Tension: .......................9-32V DC from the NMEA2000 bus
- Consumption................150mA
- Equivalent load.............3 LEN as per NMEA2000
- Size...............................104mmx86mmx588mm
- Weight...........................230g
- Mounting.......................DIN Rail Clip EN 50.022
- Case material...............Top PC/UL 94-V0, Base PPO/UL 94-V0
- Protection Class...........IP20
- Working temperature....-15ºC to +55ºC
- Storage temperature.....-25ºC to +85ºC
- Analogue Inputs:
6 x Resistive (0 to 600 Ohm) or Voltage (0-32V)
6 x Voltage (0-32V)
2 x RPM W signal or magnetic sensor
1 x Precision temperature PTC1000
1 x 100Mv current Shunt
- Analogue Input precision...... 1% or better
- Relay out.............................. 2 x Open collector output
- Data in/out:
Ethernet port (calibration and monitoring)
RS232 (module programming)
Isolated CAN NMEA2000
- Periodic:
PGN 127488 - Engine Parameters, Rapid Update
PGN 127489 - Engine Parameters, Dynamic
PGN 127493 - Transmission Parameters, Dynamic
PGN 127505 - Fluid Level
PGN 127508 - Battery Status
PGN 130314 - Pressure
PGN 130316 - Temperature, Extended Range
PGN 130576 - Trim Tab Status
Features:
- NMEA 2000 Certified Product
The unit was recognized officially by NME2000®
Check the following link:
http://www.nmea.org/Assets/20141218%20new%20nmea%202000%20certified%20products.pdf
The new AlbaCombi is a second generation device, built following our successful Alba line of converters, that translate analogue signals from all over the boat to an NMEA2000 bus. The AlbaCombi can be used to get engine data, tank levels, alarm status, generic pressure and temperature indications from any 4-20mA sensor.
- Configuration and setup from PC and without any calibration tools
The AlbaCombi has an Ethernet port that will allow web based calibration. Just connect your laptop to the AlbaCombi via Ethernet and you will get to the calibration and testing page. No calibration tools or special interfaces are required. This device is future proof and can be upgraded in the field via its Ethernet port.
- Monitor all boat parameters anytime anywhere
With AlbaCombi you can monitor engine data, tank levels, alarm status, generic pressure and temperature not only from any multifunction display but also from any smartphone or personal device with an Internet connection.
- Customize your monitoring interface
The Alba-Combi has an embedded monitoring web server that will allow to create a full monitoring display with analogue or digital gauges to be displayed in PC, Mac, iOS or Android devices. Whether it’s onboard via WiFi or ashore via an Internet connection, you can see what is happening aboard your vessel.
- Powerful
With the AlbaCombi you get twelve 0V to 32V inputs that can be used for anything from reading voltages of batteries to interfacing with any analogue gauges. Six channels can be configured to measure resistance from any industry standard engine sensor. Also there are two RPM inputs, one PTC temperature input, one shunt and two relay outputs.
- Precise
All twelve resistance and voltage channels have comprehensive calibration that allow you to create an 8 point calibration table or select a predefined industry standard calibration table for most common sensors and gauges.
- Capable
Satisfy the most demanding applications. The isolated NMEA2000 port will feed all the converted data into a NMEA2000 network.
- Versatile
The AlbaCombi can be used to get engine data, tank levels, generic pressure and temperature from any resistive, voltage or 4-20mA sensor (additional resistor needed)
Manual guide (only English):
AlbaCombi User Manual [
Download
]
Video Tutorials:
What is the AlbaCombi?
Basic configuration of AlbaCombi
One level sender configuration
Two levels senders and one battery configuration
Two levels one battery with nmea2000
Two levels one battery with Raymarine E7
Firmware Update Tutorial
Backup Tutorial
Interesting tips:
Monitoring in your tablet or even on your smartphone
1º) Connecting the Ethernet Port to an Access Point you just need to set it up at the same IP Range of the AlbaCombi and activate DHCP option on your Access Point
2º)Just type the AlbaCombi IP Address at your browser and start monitoring
Connecting two ALBA-COMBI you will be able to monitoring 4 engines
FAQs:
http://www.albacombi.com/faq/
Comparison ALBA-COMBI vs EMU-X
Features
ALBA-COMBI
EMU-X
NMEA CERTIFIED
✔
✔
MONITORING MFD
✔
✔
WEB INTERFACE MONITORING
✔
✘
GAUGE INPUTS
12
6
ETHERNET PORT
✔
✘
CUSTOM CALIBRATION
✔
✘
STANDARD CALIBRATION TABLES
✔
✘
PRICE
▼
▲
SHIPPING DETAILS
WE DON'T SHIP TO THE CANARY ISLANDS, PORTUGAL ISLANDS, CEUTA AND MELILLA
Orders will be shipped with UPS Courier with tracking number and insurance
Handling time: normally, we manage order the same day for purchases before 10:00 GMT
Delivery times:
United Kingdom, Ireland---> Standard shipping: 3-5 working days ; Express shipping:
1-2 working days
Deutschland------------------>
Standard shipping: 3-5 working days ; Express shipping:
1-2 working days
France------------------------->
Standard shipping: 3-5 working days ; Express shipping:
1-2 working days
Italy---------------------------->
Standard shipping: 3-5 working days ; Express shipping:
1-2 working days
Other Countries-------------->
Standard shipping: 4-8 working days ; Express shipping:
ask to the seller
I
MPORTANT - PLEASE NOTE (only for International Buyers -
CUSTOMERS OUTSIDE THE EUROPEAN UNION)
Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.
Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipment charges.
In case buyer rejects the item due to TAX / DUTY charges issue, we will charge the buyer back for ALL charges including both in & out shipping charges and the TAX / DUTY amount. We will reduce above charges and costs directly in the time we refund to you.